Frogs Group delivers full-service Hardscape installation services across the Lower Mainland, including patios, walkways, driveways, retaining walls, pool decks, steps, and outdoor living zones. Our crews handle excavation, base prep, paver and stone work, edge restraints, and finishing under one coordinated project. Furthermore, because we are also a licensed drainage contractor, every project includes proper grading and water management built in from day one. As a result, your hardscape stays level, crack-free, and beautiful for decades. Call 236-234-0060 for a free on-site assessment.
Why a Quality Hardscape Install Matters in BC’s Climate
A great hardscape project looks beautiful on day one, but real value shows up at years five, ten, and twenty. Therefore, the difference between a surface that performs forever and one that fails in three winters comes down to base prep, drainage, and material selection. Many of the cheapest Hardscape installation services Metro Vancouver homeowners encounter skip these steps to quote lower, which is exactly why so many patios and walkways shift, sink, or stain within just a few seasons.
Moreover, BC’s wet winters, freeze-thaw cycles, and saturated soils put constant pressure on every surface. As a result, we engineer every build to move water away from the home, not toward it, and to compact properly under the heavy loads our climate creates. Because we approach every project as both a builder and a water-management specialist, our work holds up where lower-cost installations don’t.
What Sets Our Build Process Apart
Several quality standards differentiate our crews from average installers:
- Deep excavation – 8″ to 12″, depending on use case, not just topsoil scraping
- Road-base aggregate – compacted in 2″ lifts to engineering specifications
- Edge restraints on every project – preventing shifting and spreading over time
- Polymeric sand joints – sealed against weeds, washout, and ant tunnels
- Manufacturer-approved patterns – for full warranty coverage on materials
- Licensed, insured, and WorkSafeBC-covered crews
- One project manager – from quote to final walkthrough
- Written workmanship warranty – documented for future reference
Consequently, you get a finished surface that performs as well in year ten as it did on day one.
Complete Hardscape Installation Services Menu
Frogs Group designs and builds a full range of outdoor surfaces. In addition to standard residential hardscape install work, we handle complex commercial and multi-stage projects that require coordination between drainage, lighting, and landscape design. Furthermore, every project begins with a site visit so we can recommend the right materials, layout, and pattern for your specific property.
Our hardscape services include:
- Patios – concrete pavers, natural flagstone, and porcelain options
- Driveways – heavy-duty pavers and concrete rated for vehicle loads
- Walkways and garden paths – connecting every outdoor zone
- Pool decks – slip-resistant surfaces with integrated drainage
- Retaining walls – engineered block systems with proper drainage built in
- Steps and staircases – stone, concrete, and timber options
- Permeable paver systems – for properties with strict runoff requirements
- Outdoor kitchens and fire pit surrounds – built for year-round use
- Repairs and re-levelling – for settled or damaged existing installations
- Decorative gravel zones – for low-maintenance accent areas
Materials We Work With
We help clients choose products based on style, budget, climate suitability, and durability needs:
- Concrete pavers – durable, affordable, available in hundreds of patterns
- Natural stone – flagstone, granite, slate, and basalt for premium finishes
- Porcelain pavers – modern, stain-resistant, low maintenance
- Permeable pavers – eco-friendly options that reduce stormwater runoff
- Large-format slabs – for contemporary, minimalist designs
- Architectural concrete blocks – clean lines in many colours
- Natural boulders and stepping stones – for naturalistic landscapes
- Reclaimed brick and stone – for character and heritage looks
Because we work directly with major suppliers across BC, you get competitive pricing without sacrificing material quality.
How Our Hardscape Install Process Actually Works
Every project we take on follows a refined process designed to deliver consistent, beautiful results. Therefore, our Hardscape installation services workflow is built around clear communication, reliable timelines, and respect for your property. Moreover, you have a single point of contact from quote through takedown, no transfers, no lost emails, no surprises midway through the job.
Our typical build sequence:
- Step 1 – Free site visit: We walk the property, listen to your goals, and discuss material options
- Step 2 – Written proposal: Detailed scope, materials, timeline, and transparent pricing
- Step 3 – Permitting: We handle the municipal paperwork when required
- Step 4 – Excavation and base prep: Proper depth, road-base aggregate, compacted in lifts
- Step 5 – Drainage integration: Pipes, channel drains, and slope all installed during base work
- Step 6 – Surface installation: Pavers, stone, or concrete laid in approved patterns
- Step 7 – Edge restraints and joint material: Locking the surface in place for the long term
- Step 8 – Final cleanup and walkthrough: Property left cleaner than we found it
Furthermore, repeat clients receive priority scheduling each season, and every project comes with documented warranty paperwork for future reference.
Service Areas Across Metro Vancouver
Frogs Group provides residential and commercial work throughout:
- Vancouver, North Vancouver, and West Vancouver
- Burnaby and New Westminster
- Coquitlam, Port Coquitlam, and Port Moody
- Surrey, Langley, and Delta
- Richmond
- Pitt Meadows and Maple Ridge
Not sure if we cover your neighbourhood? Just give us a quick call, and we’ll confirm the same day.
Frequently Asked Questions
How much does a professional hardscape install cost?
Pricing depends on square footage, material choice, site access, excavation depth, and whether drainage work is included. As a general guideline, most residential patios in Metro Vancouver range from $25 to $45 per square foot installed, while driveways, retaining walls, and complex projects can range higher. Furthermore, we provide a detailed written quote after a free on-site assessment, no hidden fees, and no high-pressure sales tactics.
How long do Hardscape installation services typically take?
Most residential projects are completed within one to three weeks, depending on size, complexity, and weather. Smaller walkway projects may take just two or three days, while larger driveways or multi-zone patios can stretch to four or five weeks. During your consultation, we provide a clear timeline so you know exactly what to expect from start to finish.
Do I need a permit for my project?
In many cases, no, but it depends on the municipality and the scope of work. For example, replacing an existing patio at the same footprint usually doesn’t require a permit, while a new driveway connecting to a city street typically does. As part of our service, we handle the permit process on your behalf so you don’t have to navigate municipal red tape.
Will my new hardscape install settle, crack, or shift over time?
When the base is built correctly, settling and shifting are extremely rare. The most common cause of failure is inadequate excavation depth or poor compaction during the base-prep stage. Because Frogs Group uses road-base aggregate compacted in thin lifts plus proper edge restraints on every project, our hardscape stays level and stable for decades. Additionally, we back our workmanship with a written warranty.
Can you repair an existing patio or driveway?
Absolutely. We frequently restore settled, sunken, or wavy installations from other contractors. The process involves lifting the affected pavers, correcting the base, and re-laying the stones with fresh polymeric sand. In many cases, we can blend repaired areas seamlessly with the original installation, saving you from a full tear-out and replacement.
Are permeable pavers part of your Hardscape installation services?
Yes. We install permeable paver systems for clients who want to reduce stormwater runoff, meet municipal infiltration requirements, or qualify for environmental incentives. Moreover, permeable pavers look virtually identical to standard pavers but allow water to drain straight through into a specially engineered base. As a result, you get a beautiful hardscape that also works as a built-in drainage solution.
